The electric spray gun is a power tool that sprays various low-viscosity liquids into mist. The armature is driven by an electromagnet, which acts on the piston rod to perform high-speed reciprocating motion, forming an air suction phenomenon, so that the liquid is sucked up from the container; at the same time, a high pressure is formed, which is sprayed and atomized by the nozzle at a high speed, and adheres to the surface of the object to complete the spraying. process.

MAINTENANCE WARNING: Before performing maintenance on the tool, disconnect the power to the tool.

1. Keep tools intact and clean. The vents are unblocked, and the tools should be lubricated in time.

2. Always check the power cord and power plug: check whether the switch is in good condition. In case of failure or damaged parts, please professional personnel to repair or replace the parts.

3. After the tool is used, it should be maintained in time. After the plastic casing is dirty, it can be wiped with a soft cloth. Do not use solvents such as gasoline, alcohol, carbon tetrachloride, ammonia, etc., which will damage the plastic parts.

4. Do not let the power cord come into contact with heat sources and grease. Prevent the power cord from being scratched, cut and rolled.

5. After each use of the spray gun, the cylinder body and piston rod must be cleaned.

6. After cleaning, a small amount of oil should be dripped into the piston to lubricate the internal parts.