Used Airbrush Air Compressor w/ Air Filter & hose Hobby Set AS18A

Please note it is a used airbrush Compressor, brought in Aug, 2012. Only used for several times and put in stock, now is going to move our stock so want to sell it at cheap price. the compressor works great, and can satisfy most of the airbrushing works. There is a little dirty on the wire, please do not bid if you care about the surface very much! Here is Features and Specifications:

• Powerful 1/6 Horsepower Airbrush Compressor that's Light-Wieght Portable and Compact.

• Termal Protected Compressor that automaticaly shuts off when overheated.

• Features "Air-On-Demand" System that shuts off air when not in use.

• Precise Air Adjustment Control from True Diaphragm Pressure Regulator with Gauge and Water Trap Filter that provides precise adjustment of airflow, reduces pulsation and ensures clean, dry air.

• Automatic On/Off Shutoff: Preset for automatic turn off when air pressure reaches 50 PSI. Preset for automatic turn on at 25 PSI. The reduced running time means there will less motor wear and less heat-related moisture enabling a longer compressor life.

• Maintenance Free: Oil-less Piston Motor

• Low Noise: Quiet Operation

Type: Single Cylinder Piston Compressor

Power: 1/6 Horse Power

Voltage: 230V / 50HZ

Plug: European 2 round plug (suitable for most asia country and european country, and maybe just need a travel translate adaptor)

Air Control: Pressure Regulator with Gauge and Water Trap Filter.

Air Delivery: 23 Liters/Minute; 0.7 CFM @ 50 PSI

Working Pressure: 12-35 PSI

Auto Stop/Start: Stop at 57 PSI, Start at 27 PSI

Maximum Pressure: Factory Preset at 57 PSI

Connections: 1/8'' BSP

Dimensions: 6.0" H x 5.0" W x 9" L

Weight: (3.9KG)

Electric Cord: 6 foot

And the compressor will come with an 1.8m braid air hose 1/8''-1/8'' as free gift.

FAQ

1.Question: Will this fit an Iwata Eclipse BS?

Answer: Yes it will fit the iwata. Iwata, Master, and Harder steenbecks have the same thread pattern and i believe it's 1/4 inch.

2.Question: From several reviews I've read this won't fit on a 1/8 connection. what kind of adapter will I'll need? I'm assuming either 3/8 or 1/4 to 1/8?

Answer: I put it on my master with out an adapter.

3.Question: What are in inlet and airbrush sizes? I want to adapt to a Badger 200.

Answer: I don't know the sizes but I had to buy an adapter for my badger 100G.

Hot Tags: airbrush compressor with black cover（as18a）, China, suppliers, manufacturers, factory