HomeRight Finish Max Paint Sprayer HVLP Electric Spray Gun, 1 Nozzle Sprays All, Superior Brass Spray Tip, 3 Spray Patterns

●BETTER THAN A BRUSH OR SPRAY CAN: The HomeRight Finish Max paint sprayer is an easy-to-use electric paint sprayer that applies a smooth finish without brush marks. It’s the best paint sprayer option for painting furniture, cabinets, trim, and more

●ADJUSTABLE SETTINGS, EASY TO USE: You can adjust the air cap to spray horizontal, vertical, and round. You can also adjust the material flow control knob to quickly increase or decrease the material output

●SPRAY A VARIETY OF MATERIALS: Spray a variety of materials such as thinned chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. It also comes with a viscosity cup to easily measure paint thickness

●BRASS SPRAY TIP TECHNOLOGY: The HomeRight Finish Max paint sprayer uses a 2 mm. precision brass spray tip and nozzle, which provide superior performance over plastic counterparts

●U.S. BASED CUSTOMER SERVICE AND 2 YEAR WARRANTY: Please call or chat with our U.S based customer service team for quick and efficient assistance. We’re proud of our products, which is why the Super Finish Max is backed by a 2 year warranty

FAQ

1.Question: Water trap doesn't hold air anymore, what gives?

Answer: Not exactly sure what you mean by “doesn’t hold air” so I will assume you mean that the bowl leaks air whenever air pressure is applied to the inlet. The unit I have purchased has worked flawlessly but previous units I have used have occasionally developed leaks. In general there could be four reasons fir this. [1] The plastic bowl could be broken & would need to be replaced. [2] the bowl is loose & needs to be hand tightened by gripping it with your fingers & turning it clockwise into the base. [3] The bowl O-ring is missing, damaged or out of position. Unscrew the bowl & remove it from the base. An O-ring should come out with it. Make sure it is not cut or damaged. Carefully place it on the rim of the bowl & replace the bowl & ring together in the base. A tiny dab of Vaseline on the O.ring will help it seat properly. Finally [4], dirt can get into the seat of the spring loaded drain valve on the bottom of the bowl. Push the pin a few times with the valve with full air pressure applied to clear any dirt that might be keeping the valve from seating. Hope this helps.

2.Question: What is the maximum inlet pressure?

Answer: I found that the best psi is between 30 to 35 psi and that’s for me. It may range depending on what your doing and type of airbrush. But you do not want to exceed over 45 psi

3.Question: The answers for maximum inlet side pressure is unclear. i have a 200 psi compressor, will this regulate safely reduce 200 psi to 20-40 psi?

Answer: 200 psi geez that's a lot. You might run a bigger more heavy duty reg first down to 60-70 psi if your compressor doesnt have one on it. Its kinda how i have my setup for airbrushing. This one is bolted to my table next to me.

Hot Tags: electric paint spray gun for house painting（esp-009）, China, suppliers, manufacturers, factory